An Overview of Oil Recovery Techniques: From Primary to Enhanced Oil Recovery Methods
DOI:
https://doi.org/10.55544/jrasb.3.1.48Keywords:
waterflooding, enhanced oil recovery (EOR), gas injection, thermal EOR, interfacial tension, wettability, surfactant injection, polymer injection, alkali injection, foam injection, microbial enhanced oil recoveryAbstract
As we all know, numerous methods have been invented for better managing of the reservoirs to recover the trapped oil from them as much as possible. These techniques included primary techniques that were implemented primarily at the beginning of this industry. As these techniques were not effective enough, secondary techniques, like; water flooding and gas injection methods were created and the amount of recovered oil were increased, as well. On the contrary, the demand for more oil was raised up and it was felt that much more effective techniques are necessary. It resulted to creation of Enhanced Oil Recovery Techniques and these techniques are included; thermal methods (steam injection, steam assisted gravity drainage and in-situ combustion), Chemical methods (alkali flooding, surfactant flooding, polymer flooding, foam flooding, and combination of alkali-surfactant-polymer flooding), and microbial EOR. The most promising technique is microbial EOR because of being cost-effective and ecofriendly. GEMEOR (Genetically Engineered MEOR) and EEOR (Enzyme Enhanced Oil Recovery) are two new trends of MEOR that own potential hopes in petroleum industry.
Downloads
Metrics
References
Civan, Faruk. (2015). Reservoir Formation Damage: Fundamentals, Modeling, Assessment, and Mitigation. Reservoir Formation Damage: Fundamentals, Modeling, Assessment, and Mitigation: Third Edition. 1-1012. https://www.researchgate.net/publication/283799111_Reservoir_Formation_Damage_Fundamentals_Modeling_Assessment_and_Mitigation
Mokheimer, E., M. Hamdy, Z. Abubakar, M.R. Shakeel, M.A. Habib, and M. Mahmoud. (2019). A comprehensive review of thermal enhanced oil recovery: Techniques evaluation. Journal of Energy Resources Technology 141 (3). http://dx.doi.org/10.1115/1.4041096
Kalita, P., Sharma, V., Pandey, L., Tiwari, P. (2022). Secondary and Tertiary Oil Recovery Processes. Green Energy and Technology. Springer, Singapore. 49-72. https://doi.org/10.1007/978-981-16-5465-7_2
Phade, Anish, and Yash Gupta. (2008)."Reservoir Pressure Management Using Waterflooding: A Case Study." Paper presented at the SPE Western Regional and Pacific Section AAPG Joint Meeting, Bakersfield, California, USA. doi: https://doi.org/10.2118/113068-MS
Speight, J.G. (2015) Handbook of Petroleum Product Analysis. John Wiley & Sons, Hoboken, 182. 149–189. https://doi.org/10.1002/9781118986370
Jia, C. (2012). Petroleum geology of carbonate reservoir. In Characteristics of Chinese petroleum geology, 495–532. Berlin, Heidelberg: Springer. https://doi.org/10.1007/978-3-642-23872-7_12
Shehata, A., B. Alotaibi, and H. Nasr-El-Din. (2014). Waterflooding in carbonate reservoirs: Does the salinity matter? SPE Reservoir Evaluation and Engineering 17: 304–313. http://dx.doi.org/10.2118/170254-PA
Jiang, T., H. Sun, and X. Deng. (2019). Chapter 1—Typical characteristics of fractured vuggy carbonate gas reservoirs. In Dynamic description technology of fractured vuggy carbonate gas reservoirs, 1–29. Gulf Professional Publishing. http://dx.doi.org/10.1016/C2018-0-03913-4
Al-Harrasi, A.S., R.S. Al-Maamari, and S. Masalmeh. (2012). Laboratory investigation of low salinity waterflooding for carbonate reservoirs. In Abu Dhabi international petroleum conference and exhibition. http://dx.doi.org/10.2118/161468-MS
Al-Shalabi, E.W., K. Sepehrnoori, and G. Pope. (2014). Mysteries behind the Low Salinity Water Injection technique. Journal of Petroleum Engineering 2014: 304312. http://dx.doi.org/10.1155/2014/304312
Dang, C.T.Q., N.T.B. Nguyen, and Z. Chen. (2015). Practical concerns and principle guidelines for screening, implementation, design, and optimization of low salinity waterflooding. In SPE Western regional meeting. http://dx.doi.org/10.2118/173194-MS
Derkani, M.H., A.J. Fletcher, W. Abdallah, B. Sauerer, J. Anderson, and Z.J. Zhang. (2018). Low salinity waterflooding in carbonate reservoirs: review of interfacial mechanisms. Colloids and Interfaces 2 (2): 20. http://dx.doi.org/10.3390/colloids2020020
Donaldson, E., G.V. Chilingarian, and T.F. Yen. (1989). Enhanced oil recovery, II—Process and operations. Netherlands: Elsevier. https://shop.elsevier.com/books/enhanced-oil-recovery-ii/donaldson/978-0-444-42933-9 (Book)
Johns, R.T. (2004). Oil recovery. In Encyclopedia of energy, ed. C.J. Cleveland, 701–713. New York: Elsevier.
Barton, H.B., and F.R. Dykes Jr. (1958). Performance of the Pickton field. Journal of Petroleum Technology 10 (02): 27–31. https://doi.org/10.2118/908-G
Alvarado, V., and E. Manrique. (2010). Enhanced oil recovery: An update review. Energies 3 (9): 1529–1575. https://doi.org/10.3390/en3091529
Datta, P., P. Tiwari, and L.M. Pandey. (2018). Isolation and characterization of biosurfactant producing and oil degrading Bacillus subtilis MG495086 from formation water of Assam oil reservoir and its suitability for enhanced oil recovery. Bioresource Technology 270: 439–448. https://doi.org/10.1016/j.biortech.2018.09.047
Bera, A., K. Ojha, A. Mandal, and T. Kumar. (2011). Interfacial tension and phase behavior of surfactant-brine–oil system. Colloids and Surfaces A: Physicochemical and Engineering Aspects 383 (1–3): 114–119. http://dx.doi.org/10.1016/j.colsurfa.2011.03.035
Kokal, S., and Al-Kaabi, A., (2010), “Enhanced Oil Recovery: Challenges & Opportunities,” World Petroleum Council, EXPEC Advanced Research Centre, Saudi Aramco, accessed Aug. 24, 2018, https://www.world-petroleum.org/docs/docs/publications/2010yearbook/P64-69_Kokal-Al_Kaabi.pdf
Santos, R., W. Loh, A. C. Bannwart, and O. V. Trevisan. (2014). An overview of heavy oil properties and its recovery and transportation methods. Brazilian Journal of Chemical Engineering 31: 571–590. http://dx.doi.org/10.1590/0104-6632.20140313s00001853
Green, D.W., and G.P. Willhite. (1998b). Enhanced oil recovery. Henry L. Doherty Memorial Fund of AIME, Society of Petroleum Engineers. https://www.scirp.org/reference/ReferencesPapers?ReferenceID=1810358
Carcoana, A. (1982). Enhanced oil recovery in Rumania. Paper SPE 10699 presented at the SPE enhanced oil recovery symposium held in Tulsa, OK. https://doi.org/10.2118/10699-MS
Gbadamosi, Afeez & Junin, Radzuan & Manan, Mohammad & Augustine, Agi & Yusuff, Adeyinka. (2019). An overview of chemical enhanced oil recovery: recent advances and prospects. International Nano Letters. 9. 1-32. DOI:10.1007/s40089-019-0272-8
Alvarez, J., and S. Han. (2013). Current overview of cyclic steam injection process. Journal of Petroleum Science Research 2 (3). https://www.academia.edu/26208229/Current_Overview_of_Cyclic_Steam_Injection_Process
Ghoodjani, E., R. Kharrat, M. Vossoughi, and S.H. Bolouri. (2012). A review on thermal enhanced heavy oil recovery from fractured carbonate reservoirs. In SPE heavy oil conference Canada. Society of Petroleum Engineers. https://doi.org/10.2118/150147-MS
Pang, Z., Liu, H., and Zhu, L., (2015). “A Laboratory Study of Enhancing Heavy Oil Recovery with Steam Flooding by Adding Nitrogen Foams,” J. Pet. Sci. Eng., 128, pp. 184–193. https://www.proquest.com/scholarly-journals/study-on-adaptability-nonhydrocarbon-gas-assisted/docview/2686035497/se-2
Hosseini, S. M. T., Esfahani, S., Doulatabadi, M. H., Sarapardeh, A. H., and Mohammadi, A. H., (2017). “On the Evaluation of Steam Assisted Gravity Drainage in Naturally Fractured Oil Reservoirs,” Petroleum, 3(2), pp.273–279. https://doi.org/10.1016/j.petlm.2016.01.003
Ursenbach, M.G., Moore, R.G., and S.A. Mehta. (2010). "Air Injection in Heavy Oil Reservoirs - A Process Whose Time Has Come (Again)." J Can Pet Technol 49: 48–54. doi: https://doi.org/10.2118/132487-PA
Dong Xiaohu, Huiqing Liu, Jirui Hou, Zhaoxiang Zhang, Zhangxing (John) Chen, (2015). Multi-thermal fluid assisted gravity drainage process: A new improved-oil-recovery technique for thick heavy oil reservoir, Journal of Petroleum Science and Engineering, Volume 133, Pages 1-11, https://doi.org/10.1016/j.petrol.2015.05.001.
Mandal, A.: Chemical flood enhanced oil recovery: a review. Int. J Oil Gas Coal Technol. 9, 241–264 (2015). http://dx.doi.org/10.1504/IJOGCT.2015.069001
Khlaifat, A. L., Duaa, D., & Faraz, S. (2022). "A Critical Review of Alkaline Flooding: Mechanism, Hybrid Flooding Methods, Laboratory Work, Pilot Projects, and Field Applications" Energies 15, 10: 3820. https://doi.org/10.3390/en15103820
Schumi, B., Clemens, T., Wegner, J., Ganzer, L., Kaiser, A., Hincapie, R. E., & Leitenmüller, V. (2020). "Alkali/Cosolvent/Polymer Flooding of High-TAN Oil: Using Phase Experiments, Micromodels, and Corefloods for Injection-Agent Selection." SPE Reservoir Evaluation & Engineering 23: 463–478. https://doi.org/10.2118/195504-PA
Deng, X., Tariq, Z., Murtaza, M., Patil, S., Mahmoud, M., Kamal, M. S. (2021). Relative contribution of wettability Alteration and interfacial tension reduction in EOR: A critical review, Journal of Molecular Liquids, 325, 115-175, https://doi.org/10.1016/j.molliq.2020.115175
Speight, J.G. (2016). Asphalt Materials Science and Technology; Springer: Berlin/Heidelberg, Germany. 41, 923–926. https://doi.org/10.1557/mrs.2016.267
Van, L. S., & Chon, B. H. (2016). "Chemical Flooding in Heavy-Oil Reservoirs: From Technical Investigation to Optimization Using Response Surface Methodology" Energies 9, no. 9: 711. https://doi.org/10.3390/en9090711
Gbadamosi, A., Yusuff, A., Agi, A., & Oseh, J. (2022). An Overview of Natural Surfactant Application for Enhanced Oil Recovery. IntechOpen. https://doi:10.5772/intechopen.104935
Abbas, A. H., Sulaiman, W. R.W., Jaafar, M. Z., Gbadamosi, A. O., Ebrahimi, S. S., & Elrufai, A. (2018). Numerical study for continuous surfactant flooding considering adsorption in heterogeneous reservoir. Journal of King Saudi University. 32(1):91-99. http://dx.doi.org/10.1016/j.jksues.2018.06.001
Dang, C. T. Q., Chen, Z., Nguyen, N., Bae, W., & Phung, H. (2011). Development of Isotherm Polymer/Surfactant Adsorption Models in Chemical Flooding. Society of Petroleum Engineers - SPE Asia Pacific Oil and Gas Conference and Exhibition. 2. https://doi.org/10.2118/147872-MS
Emegwalu, C. C., (2010). Enhanced oil recovery for Norne Field’s E-segment using surfactant flooding. Norges teknisk-naturvitenskapelige universitet, Fakultet for …; http://hdl.handle.net/11250/23939
Schramm, L. L. (2000). Surfactants: fundamentals and applications in the petroleum industry. New York: Cambridge University Press; http://dx.doi.org/10.2307/3515635
Paternina, C. A. (2022). Applications of Surfactants and Nanoparticles in Enhanced Oil Recovery Processes. In Sedimentary Petrology-Implications in Petroleum Industry. 36-64. http://dx.doi.org/10.5772/intechopen.97506
Olajire, A.A.: (2014). Review of ASP EOR (alkaline surfactant polymer enhanced oil recovery) technology in the petroleum industry: prospects and challenges. Energy 77, 963–982. https://doi.org/10.1016/j.energy.2014.09.005
ShamsiJazeyi, H., Miller, C.A., Wong, M.S., Tour, J.M., Verduzco, R.: (2014). Polymer-coated nanoparticles for enhanced oil recovery. J. Appl. Polym. Sci. 131, 1–13. https://doi.org/10.1002/app.40576 Mandal, A., Samanta, A., Ojha, K.: (2013). Mobility control and enhanced oil recovery using partially hydrolysed polyacrylamide (PHPA). Int. J. Oil Gas Coal Technol. 6, 245–258. https://doi.org/10.1504/IJOGC T.2013.05223 6
Mandal, A., Samanta, A., Ojha, K.: (2013). Mobility control and enhanced oil recovery using partially hydrolysed polyacrylamide (PHPA). Int. J. Oil Gas Coal Technol. 6, 245–258. https://doi.org/10.1504/IJOGC T.2013.05223 6
Sheng, J.J.: (2013). Polymer flooding—fundamentals and field cases. Enhanced Oil Recovery Field Case Studies, Gulf Professional Publishing, 63-82. https://doi.org/10.1016/b978-0-12-38654 5-8.00003 -8
Zaitoun, A., Makakou, P., Blin, N., Al-Maamari, R.S., Al- Hashmi, A.-A.R., Abdel-Goad, M.: (2012). Shear stability of EOR polymers. SPE-141113-PA. SPE J. 17, 335–339. https://doi.org/10.2118/141113-pa
Wei, B., Romero-Zerón, L., Rodrigue, D.: (2014). Oil displacement mechanisms of viscoelastic polymers in enhanced oil recovery (EOR): a review. J. Pet. Explor. Prod. Technol. 4, 113–121. https://doi.org/10.1007/s1320 2-013-0087-5
Veerabhadrappa, S.K.: (2013). Study of effects of polymer elasticity on enhanced oil recovery by core flooding and visualization experiments (thesis). A Master’s thesis submitted to the Department of Civil and Environmental Engineering, University of Alberta. https://doi.org/10.7939/R39M64
Rafati, R., Haddad, A.S., Hamidi, H.: (2016). Experimental study on stability and rheological properties of aqueous foam in the presence of reservoir natural solid particles. Colloids Surf. A Physicochem. Eng. Asp 509, 19–31. https://doi.org/10.1016/j.colsu rfa.2016.08.087
Yekeen, N., Manan, M.A., Idris, A.K., Samin, A.M.: (2017). Influence of surfactant and electrolyte concentrations on surfactant Adsorption and foaming characteristics. J. Pet. Sci. Eng. 149, 612–622. https://doi.org/10.1016/j.petro l.2016.11.018
Hirasaki, G., Miller, C.A., Puerto, M.: (2011). Recent advances in surfactant EOR. Soc. Pet. Eng. J. 16, 889–907. https://doi.org/10.2118/115386-PA
Sheng, J.J.: (2017). Critical review of alkaline–polymer flooding. J. Pet. Explor. Prod. Technol. 7, 147–153. https://doi.org/10.1007/s1320 2-016-0239-5
Yusuf, S. M., Junin, R., Sidek, M. A. M., Agi, A., Fuad, M. F. I. A., Rosli, N. R., Abd Rahman, N., Yahya, E., Wong, N. A. M. S., & Mustaza, M. H., (2021). Screening the synergy of sodium dodecylbenzenesulfonate and carboxymethyl cellulose for surfactant-polymer flooding. Petroleum Research. 7(3). 308-317. https://doi.org/10.1016/j.ptlrs.2021.11.002
Samanta, A., Ojha, K., Sarkar, A., Mandal, A.: (2011). Surfactant and surfactant–polymer flooding for enhanced oil recovery. Adv. Pet. Explor. Dev. 2, 13–18. http://dx.doi.org/10.3968/j.aped.1925543820110201.608
Pogaku, R., Mohd Fuat, N.H., Sakar, S., Cha, Z.W., Musa, N., Awang Tajudin, Morris, L. O.: (2018). Polymer flooding and its combinations with other chemical injection methods in enhanced oil recovery. Polymer Bulletin. 74, 1–22. https://link.springer.com/article/10.1007/s00289-017-2106-z
Dang, C., Nghiem, L., Nguyen, N., Yang, C., Chen, Z., Bae, W.: (2018). Modeling and optimization of alkaline–surfactant–polymer flooding and hybrid enhanced oil recovery processes. J. Pet. Sci. Eng. 169, 578–601. https://doi.org/10.1016/j.petro l.2018.06.017
Phukan, Ranjan & Saha, Rahul & Pandey, Lalit & Tiwari, Pankaj. (2022). CO2-Based Enhanced Oil Recovery. Springer, Singapore. 16. 978-981. http://dx.doi.org/10.1007/978-981-16-5465-7_3
Srivastava, R.K., S.S. Huang, and M. Dong. (2000). Laboratory investigation of weyburn CO2 miscible flooding. Journal of Canadian Petroleum Technology 39 (2): 41–51. http://dx.doi.org/10.2118/00-02-04
Yongmao, H., W. Zenggui, J.B.C. Yueming, and L. Xiangjie. (2004). Laboratory investigation of CO2 flooding. Paper presented at the Nigeria Annual International Conference and Exhibition, Abuja, Nigeria, August 2004. http://dx.doi.org/10.2118/88883-MS
Geetha, S.J., Banat, I.M., Joshi, S.J., (2018). Biosurfactants: production and potential applications in microbial enhanced oil recovery (MEOR). Biocatal. Agric. Biotechnol. 14, 23–32. DOI:10.1016/j.bcab.2018.01.010
Jianjie Niu, Qi Liu, Jing Lv, Bo Peng, (2020). Review on microbial enhanced oil recovery: Mechanisms, modeling and field trials, Journal of Petroleum Science and Engineering, Volume 192, https://doi.org/10.1016/j.petrol.2020.107350
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Mohammad Hamid Mohammadi, Yernazarova Aliya Kulakhmetovna, Reza Joia
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.